Our new range of LED T8 Tubes are fluorescent replacements designed to work with either a direct connection or for use in existing switch start / magnetic ballast systems.
Through the use of high efficiency LEDs and a lumen efficiency of over 100 lumens per watt, our LED tubes produce intense levels of light for less than half the power of a traditional fluorescent tube.
Features
• Efficient power supply - other LED tubes are unregulated and run the risk of premature failure with fluctuating mains input. These LED Tubes have been
specifically modified to both withstand transients (spikes) and varied supply input.
• Real world Luminous Flux Testing - Comparative testing has been done against standard T8 Fluorescents with the results showing acceptable drops in effective light levels and an increase in effective light with certain models.
• High compatibility - Testing has been done with various magnetic ballasts which has shown high compatibility, resulting in an easy fit with only the starter and capacitor needed to be removed.
Compatibility
Our LED tubes are compatible with the vast majority of luminaries with G13 push through holders.
The tubes are designed to run directly off the mains, however they are compatible with the majority of magnetic ballasts and require a simple removal of the starter.
Electronic ballasts will need to be bypassed / removed.
CE Approved, tested to standards:
EN 60598-1:2004+A1
EN 60598-2-1:1989
EN 55015:2006
EN 61000-3-2:2006
EN 61000-3-3:1995+A1+A2
EN 61547:1995+A1
General Specifications
6500K Commercial Grade High Power LED T8 Tube
| Description |
Watts |
Effective Lumens |
| 600mm 2 Foot LED T8 Tube |
10 |
1100 |
| 900mm 3 Foot LED T8 Tube |
13 |
1700 |
| 1200mm 4 Foot LED T8 Tube |
17 |
2300 |
| 1500mm 5 Foot LED T8 Tube |
20 |
3000 |
| Tube Diameter |
26mm |
| Electrical Input |
200v to 245v AC 50/60Hz |
| Operation Temperature |
-20 to 50ºC |
| Connection Base |
T8 / T10, G13 Push Through |
| Average Lifespan |
up to 50,000 hours |
|
|
Applications
Offices - Ceiling mounted modular fittings
Walkways - Single or Double tube battens with or without diffusers
Signage - Backlit signs etc |
|
|