They contain Red, Green & Blue LEDs to allow full RGB colour mixing.

For optimum results, you should ensure that the surface to be illuminated has a matt finish, it is a common misconception that reflective surfaces will illuminate best.

The LED Pipes are both powered and controlled via the IDL-171.

The controller features two 24 vdc outputs, but units connected to the IDL-171 will all be the same colour at the same time regardless of which output they are connected to. Units are wired in parallel using 4 core cable.

If you require control of the colour of individual tubes, see the LED Pipe DMX on the opposite page.

The controller can be used stand-alone to set a fixed colour, roll through all colours at a variable speed, and strobe all units at a variable speed. By connecting a DMX controller, these features can be controlled remotely.

They are powered by the IDL-109P drive unit which provides power for up to 20 DMX Pipes, after which additional
IDL-109P units must be used to power further multiples of up to 20 pipes.

The LED Pipe DMX is ideal for use in retail, exhibition, stage, and much more.

The LED Back Light Strings are perfect for illuminating signage and highlighting architectural features and stage sets. They are extremely compact, which allows them to be easily concealed, and the minimal operating temperature makes them ideal for use in enclosed spaces such as internal lighting for signage.

They are IP68 rated, so suited to both indoor and outdoor use.

The string is supplied with 20 LED modules and can easily be cut and joined as required. The maximum number of backlight modules in a continuous string is 80 pieces.

The strings are connected to a Transformer which will power a maximum of 400 modules (e.g. 20 strings of 20 modules).